Henan K-Home Steel Structure Co., Ltd.
Tel:+86 3732511966 +8618790630368 E-mail:info@khomechina.com
Add to Cart
Cheap Manufactured Prefab Steel House Sleeping Accommodations
This is a kind of temporary house, which can be stacked to 1-3 stories, each room has a standard module.
The house is instlalled directly on the concement floor.
The columns, beams, purlins,wall panel and roofs are connected by screws.
A 200 m2 house can be finished by 6 workers in one day, which greatly save labor and time cost.
The prefab steel house will last for about 15 years and can be disassemed and assembled again and again,
allowing it to be used on new projects when the project changes site locations.
The price is very low, about $50-70 per square meters, which not only saves the cost but also improves
the quality of life of workers.
Detail Specification of Prefab Steel House
|
I. Steel Structure
| ||
| 1. | Ground beam Material: Galvanized steel
| |
| 2. | Corner Column Material: black strip steel / galvanized steel sheet
Powder spraying (Black steel strip) | |
| 3. | Wall column Material: black strip steel / galvanized steel sheet
Powder spraying (Black steel strip) (Wall column have joint parts) | |
| 4. | Gable column Material: black strip steel / galvanized steel sheet
Powder spraying (Black steel strip) (Gable column don’t have joint parts) | |
| 5. | Door column Material: black strip steel / galvanized steel sheet
Powder spraying (Black steel strip) | |
| 6. | Lintel Material: black strip steel / galvanized steel sheet
Powder spraying (Black steel strip) | |
| 7. | Roof Purlin Material: Galvanized steel
| |
| 8. | Herringbone beam Material: Galvanized square tube + Galvanized Angle iron
| |
| II. Accessories: | ||
| 1 | Floor Flashing Shaped Groove Function: Put between the wall panel and ground beam, block the inflow of rainwater Material: Galvanized steel plate | |
| 2 | Eave Cover Function: Seal the exposed part of the roof rock wool and guide the rainwater down Material: Galvanized steel plate | |
| 3 |
Outside Ridge Cover Function: Cover the roof ridge above sandwich panel Material: Galvanized steel plate | |
| 4. | Inner Ridge Cover Function: Cover the roof structure ridge on the Herringbone beam Material: Galvanized steel plate | |
| 5 | 50mm U Shaped Steel Groove Function: Fix the partition panel Material: Galvanized steel plate | |
| 6 | Buckle cap Purpose: Used in the joints of roof sandwich panels to prevent rainwater from infiltrating Material: Galvanized steel plate | |
| 7 | Bolts, Screws and Glue
The choice of screw is important, good quality screws easy to be insert in the steel will help installation work; Otherwise, will waste time for insert the screw. | |
| 8 | Galvanized Steel plate corner Function: Seal the corner of the partition board and the wall Material: 0.4mm Galvanized steel plate | |
| III. Maintenance and Decoration Material | ||
| 1. | Sandwich wall panel Material: 50kg/m3 density rock + 0.4mm galvanized steel plate on both sides | |
| 2. | Sandwich roof panel Material: 50kg/m3 density rock + 0.4mm galvanized steel plate on both sides | |
| 3. | Door Material: 0.45mm steel plate on both Middle: Honeycomb panel Door Frame: 0.8mm steel Lock: Lock with handle type (Easy to open and close ) | |
| 4. | Window Window frame: 8.0mm plastic steel Glass: 2.2mm single glass | |
| 5. | Ceiling Material: 7.5 mm Gypsum Ceiling with accessories | |
| Reference Size: Note: K=1820mm P=950mm (The length of the building can be customized according to your needs. | ||||
| Width | 2K=3640 | 3K=5460 | 4K=7280 | 5K=9100 |
| Length | nK=n*1820 | |||
| Height | 3P=2850 | 6P=5700 | ||
Project Show